TRALT Ergonomic Mesh Office Chair Review
A budget ergonomic gaming chair rated to 330 lbs with fully adjustable lumbar support, a sliding headrest, and armrests that flip completely out of the way.
The TRALT Ergonomic Mesh Office Chair is worth buying if you want a budget ergonomic gaming chair that holds up to 330 lbs and adjusts almost everywhere. The lumbar support slides up and down on a lever, the headrest moves, and the armrests flip completely out of the way. Buy it.
This post contains affiliate links. I may earn a commission at no extra cost to you.
How this review was made: written from my own video review of this product. Every opinion here is my own, from using it myself.
Quick Verdict
Three adjustments on this chair do things most budget ergonomic chairs won’t: the lumbar slides to your actual back height on a lever, the armrests flip completely behind you instead of just folding down, and the whole frame holds 330 lbs without flexing or creaking. That’s the short version.
Buy if you:
- Want lumbar support you can slide to your own back height, not a fixed bump
- Need a chair rated for a bigger body (330 lbs capacity)
- Pull up close to a desk and want the armrests gone entirely
- Sit for long work or gaming sessions and want mesh instead of a hot foam back
Skip if you:
- Want recline lock positions. There are only two modes, upright or lean back, nothing in between
- Are tall enough to need the headrest past its top stop
- Don’t want to spend ~15 minutes assembling a chair out of a box
| Weight capacity | 330 lbs |
|---|---|
| Dimensions | 38.2″ H × 21.7″ L × 25.6″ W |
| Seat | 20″ W × 17.3″ D, height 18.5″, 23″ |
| Recline | 90°, 120° tilt, flip-up armrests |
| Gas lift | Class 3 BIFMA-certified anti-sink cylinder |
| Assembly | ~15 minutes |
Pushing the Armrests All the Way Back
The armrests flip completely out of the way, and that’s the feature I keep coming back to. High version, low version, or gone. You push them back and they’re not in your life anymore, which I think is such a genius idea if you ever pull up tight to a desk or want to sit cross-legged. They come right back down when you want them. You can check the current price on amzlink.to if that alone is enough for you.
The best part in terms of adjustability, though, is the lumbar support. That piece for your lower back is fully adjustable. All you have to do is turn the lever to loosen it, slide it all the way down to its lowest point, or run it all the way up. I actually like mine a little bit higher. Most budget ergonomic office chairs give you a molded bump and tell you that’s lumbar support. This one you set to your own spine.
Headrest is the same deal. Pull it up if you’re taller, push it down if you’re shorter like me. Seat height goes up and down the usual way, 18.5 to 23 inches.
Two modes on the tilt. Push the bottom lever in and you’re locked perfectly upright, fully supported. Pull it out and you can lean back, 90° to 120°. That’s the one thing I’d call a limit here: it’s in or out. There’s no clicking into a half-reclined position and leaving it there, so if you lean, you’re riding the tension the whole time.
What Ownership Costs After the Box
Almost nothing, and that’s the point of mesh. The lumbar, the back and the headrest are all a really nice breathable mesh, so there’s no fabric to shampoo and nothing that holds heat from a six-hour session. A wipe-down handles it.
The seat base is a supportive cushion rather than mesh, and that’s the part that wears on cheap chairs. TRALT uses high-resilience molded foam meant to keep its shape. The gas lift is a Class 3 BIFMA-certified anti-sink cylinder, which matters more than people think, since a sinking chair is the number one way a cheap ergonomic desk chair dies. Warranty is two years, with a lifetime variant listed on TRALT’s own site.
No consumables, no proprietary parts to reorder. Assembly runs about 15 minutes per the instructions.
Where a Budget Ergonomic Gaming Chair Like This Fits
This sits in the crowded space between gaming bucket seats and real office chairs, and it leans office. A racing-style gaming chair gives you bolsters and a pillow strapped on with elastic. This gives you a mesh back, a lumbar block you can actually position, and a 330 lb rating on a reinforced nylon base with a metal core.
Compared against the stack of budget ergonomic office chairs under the Herman Miller tier, the differentiator here is adjustability per dollar. Plenty of cheap ergonomic desk chairs advertise lumbar support and deliver a fixed curve. Fewer give you a sliding lumbar plus a sliding headrest plus three-position armrests on the same frame.
Below the Herman Miller tier, almost nothing at this price gives you a sliding lumbar, a sliding headrest, and flip-back armrests on the same frame. That’s the gap this chair fills, and it fills it cleanly. Check it out here on amzlink.to.
Would I Sit In It All Day?
Yes, and the mesh is the reason. Breathable mesh across the back and headrest with a supportive cushion under you is the combination that makes long sessions work. It keeps you supported and comfortable at all times, and it doesn’t turn into a heat trap by hour four.
The 330 lb rating isn’t a marketing line either. Sitting in it, nothing flexes or creaks where it shouldn’t. It’s not going to break on you.
The trade-off is the binary tilt. Two modes is fewer than I’d want for a chair I live in, and if you’re the type who likes to park at 105° and work there, that’s a compromise you’ll feel. Everything else about the adjustability over-delivers for what this costs. If the binary tilt isn’t a dealbreaker for you, and for most desk workers it won’t be, this is the chair to buy.
Pros
- Lumbar support slides on a lever from lowest to highest, set it to your own back
- Armrests go high, low, or flip completely back and out of the way
- Headrest adjusts up and down for taller or shorter users
- 330 lb capacity with no flex or creak
- Breathable mesh back and headrest with a supportive cushioned seat
Cons
- Tilt is binary. Upright locked or free lean, no intermediate recline lock
- Headrest has a top stop that taller users may run out of
- Requires assembly out of the box, roughly 15 minutes
Frequently Asked Questions
Will it roll on hardwood without scratching?
It uses silent rolling 360° casters, which are designed for quiet movement rather than the hard plastic wheels on bargain chairs. On hardwood I’d still put a mat down for peace of mind over a few years. Caster swaps are standard-fit if you ever want rubber ones.
What’s the warranty if the gas cylinder fails?
Two years, with a lifetime warranty listed on one variant on TRALT’s official site. The cylinder itself is a Class 3 BIFMA-certified anti-sink unit, which is the rating that covers repeated height cycling. Gas lifts are also the cheapest chair part to replace if it ever comes to that.
Does the 330 lb rating mean the base or the whole chair?
The whole chair. The reinforced nylon base has a metal core and is rated to 330 lbs, and the cylinder and frame are matched to it. That’s the number that separates a heavy-duty budget ergonomic desk chair from the all-plastic ones.
Will it fit under a standard desk with the armrests up?
At its lowest seat height of 18.5 inches with the armrests dropped to their low position it clears most standard desks. If it doesn’t, flip the armrests all the way back and the chair slides straight under. That’s the real reason the flip-back design is useful.
Clicking takes you to amzlink.to. We may earn a small commission if you purchase, at no extra cost to you.
Get it now
TRALT Ergonomic Mesh Office Chair
Get the best price on amzlink.to →Affiliate link. See the disclosure at the top of this post.
🛍️ Shop everything in this video
Every product mentioned, in one place. These are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Ergonomic Office Chair with Lumbar Support (330 lbs Heavy Duty): check price on Amazon →
